If you are looking for a window fitter near you in Buckingham, this is the part of the job where repair is no longer the answer — new UPVC windows measured, fitted, sealed and made good, from one opening to a whole house.
Most of our work is repairs, and that shapes how we quote for replacements. If the frame is sound and only a handle, a hinge or a sealed unit has failed, you will be told that — even though fitting a new window would be the bigger job for us.
But some windows really are finished. Frames that have gone brittle and cracked at the corner welds cannot be squared up. Profiles from the early days of UPVC often have no spare parts still in production. Single glazing will never insulate whatever you do to it. And when four separate things have failed on the same window, the sums stop favouring a repair.
When that is the case, this is what fitting the replacement actually involves.
Most of the difference between a good installation and a bad one is in the preparation and the finishing, not the window itself.
Every opening measured individually — houses settle and no two are identical, even on the same elevation. Glass specification and opening arrangement agreed at this stage.
The windows are made to those measurements, with the openers, handles, colour and glass you chose. Nothing is cut down on site to make it fit.
The old frame is cut and worked out rather than levered, keeping the reveal and the surrounding plaster and render as intact as possible.
New frame packed, levelled, mechanically fixed, then sealed inside and out. The sashes are tested, the trims fitted and the old frames taken away.
The bit people forget to ask about: what happens around the outside of the frame. A window that is foamed into a gap and left will let water track in behind the seal within a couple of winters. The joint between frame and reveal wants packing, fixing and sealing properly — that is what keeps the weather out, not the window itself.
The style follows the property. A Georgian frontage on or near Market Hill wants a different window from a nineteen-eighties estate house on the edge of town.
The standard British window — side or top hung openers within a fixed frame, in whatever combination of openers and fixed lights the opening needs.
Two positions from one handle — tilted in at the top for secure ventilation, or swung fully inwards for cleaning from inside.
Bay and bow windows need corner posts and load-bearing consideration, so they are surveyed more carefully than a straight opening.
These change the price and the manufacturing spec, so they are agreed before anything is ordered rather than on fitting day.
Including us. If a quote does not cover these, it is worth asking why before you sign anything.
What people in Buckingham ask before booking a replacement.
One window is perfectly normal work. Plenty of jobs are a single opening that has finally failed while the rest of the house is fine.
Doing several at once does bring the cost per window down, because the setting up, the access and the making good are shared across the job — but there is no minimum and no pressure to replace windows that do not need it.
Replacement windows in England are covered by the Building Regulations, which set requirements for thermal performance, safety glass in critical locations, ventilation and means of escape from certain rooms. Compliance is normally handled either through a registered competent person scheme or by notifying Building Control.
Tell us at the quoting stage what the property is and what the room is used for, so the right specification and route are agreed before anything is ordered.
A straightforward ground floor casement is usually out and replaced within a few hours, and several windows in one property are commonly done over a day or two. Bays, large openings and anything needing scaffold or extra access take longer.
The manufacturing time for made-to-measure frames is separate and comes before the fitting date.
They go with us. The old frames, glass, beading and offcuts are removed from site and disposed of, and the working area is cleared up.
You should not be left with a pile of broken glass and PVC in the garden after a window fitter has been.
Taking a frame out inevitably disturbs the edge of the opening, which is why the reveal is cut around rather than levered out, and why the new frame is sized to sit within the existing opening.
Any small gaps left are filled and sealed, and trims are used where the original finish cannot be matched exactly. We will tell you before starting where making good is likely to be needed.
We work across Buckingham and the surrounding area, including Maids Moreton, Gawcott, Padbury, Tingewick, Akeley, Thornborough, Steeple Claydon, Winslow, Silverstone, Deanshanger, Brackley, Towcester, Stony Stratford and the western side of Milton Keynes.
Ring 07765 923817 with your postcode and you will get a straight yes or no — or check the full coverage list first.
Whether it is one window that has finally given up or a whole elevation, ring or email and we will arrange to look at the openings and price the job.
New UPVC windows fitted across Buckingham, the MK18 villages and the surrounding towns.